dmesg - AMD Radeon Vega
Linux version 4.16.0-041600rc6-generic (kernel@gloin) (gcc version 7.2.0 (Ubuntu 7.2.0-8ubuntu3.2)) #201803182230 SMP Mon Mar 19 02:32:18 UTC 2018
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000003ffffff] usable
BIOS-e820: [mem 0x0000000004000000-0x000000000400ffff] ACPI NVS
BIOS-e820: [mem 0x0000000004010000-0x0000000009cfffff] usable
BIOS-e820: [mem 0x0000000009d00000-0x0000000009ffffff] reserved
BIOS-e820: [mem 0x000000000a000000-0x000000005bb92fff] usable
BIOS-e820: [mem 0x000000005bb93000-0x000000005bcddfff] reserved
BIOS-e820: [mem 0x000000005bcde000-0x000000005be0bfff] usable
BIOS-e820: [mem 0x000000005be0c000-0x000000005c1dafff] ACPI NVS
BIOS-e820: [mem 0x000000005c1db000-0x000000005d009fff] reserved
BIOS-e820: [mem 0x000000005d00a000-0x000000005effffff] usable
BIOS-e820: [mem 0x000000005f000000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021f33ffff] usable
NX (Execute Disable) protection: active
random: fast init done
SMBIOS 3.0.0 present.
DMI: Gigabyte Technology Co., Ltd. AB350M-DS3H/AB350M-DS3H-CF, BIOS F1 01/12/2018
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x21f340 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFE0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000220000000 aka 8704M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x5f000 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ (ptrval)] 97000 size 24576
Using GB pages for direct mapping
BRK [0x13cf40000, 0x13cf40fff] PGTABLE
BRK [0x13cf41000, 0x13cf41fff] PGTABLE
BRK [0x13cf42000, 0x13cf42fff] PGTABLE
BRK [0x13cf43000, 0x13cf43fff] PGTABLE
BRK [0x13cf44000, 0x13cf44fff] PGTABLE
BRK [0x13cf45000, 0x13cf45fff] PGTABLE
BRK [0x13cf46000, 0x13cf46fff] PGTABLE
BRK [0x13cf47000, 0x13cf47fff] PGTABLE
BRK [0x13cf48000, 0x13cf48fff] PGTABLE
BRK [0x13cf49000, 0x13cf49fff] PGTABLE
BRK [0x13cf4a000, 0x13cf4afff] PGTABLE
BRK [0x13cf4b000, 0x13cf4bfff] PGTABLE
RAMDISK: [mem 0x31b27000-0x34d8afff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
ACPI: XSDT 0x000000005BE0C090 0000A4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000005BE12438 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20180105/tbfadt-658)
ACPI: DSDT 0x000000005BE0C1D0 006267 (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x000000005C1C4E00 000040
ACPI: APIC 0x000000005BE12550 0000DE (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000005BE12630 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x000000005BE12678 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x000000005BE12718 005353 (v02 AMD AmdTable 00000002 MSFT 02000002)
ACPI: CRAT 0x000000005BE17A70 000810 (v01 AMD AMD CRAT 00000001 AMD 00000001)
ACPI: CDIT 0x000000005BE18280 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001)
ACPI: SSDT 0x000000005BE182B0 002AC4 (v01 AMD AMD AOD 00000001 INTL 20120913)
ACPI: MCFG 0x000000005BE1AD78 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 0x000000005BE1ADB8 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: UEFI 0x000000005BE1ADF0 000042 (v01 00000000 00000000)
ACPI: IVRS 0x000000005BE1AE38 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000)
ACPI: SSDT 0x000000005BE1AF08 0000F8 (v01 AMD AMD PT 00001000 INTL 20120913)
ACPI: SSDT 0x000000005BE1B000 0016CF (v01 AMD AmdTable 00000001 INTL 20120913)
ACPI: SSDT 0x000000005BE1C6D0 00195E (v01 AMD AmdTable 00000001 INTL 20120913)
ACPI: SSDT 0x000000005BE1E030 00119C (v01 AMD AMD CPU 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021f33ffff]
NODE_DATA(0) allocated [mem 0x21f315000-0x21f33ffff]
tsc: Fast TSC calibration failed
tsc: Using PIT calibration value
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000021f33ffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x0000000003ffffff]
node 0: [mem 0x0000000004010000-0x0000000009cfffff]
node 0: [mem 0x000000000a000000-0x000000005bb92fff]
node 0: [mem 0x000000005bcde000-0x000000005be0bfff]
node 0: [mem 0x000000005d00a000-0x000000005effffff]
node 0: [mem 0x0000000100000000-0x000000021f33ffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000021f33ffff]
On node 0 totalpages: 1559683
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 5927 pages used for memmap
DMA32 zone: 379303 pages, LIFO batch:31
Normal zone: 18381 pages used for memmap
Normal zone: 1176384 pages, LIFO batch:31
Reserved but unavailable: 100 pages
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 10, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
smpboot: Allowing 16 CPUs, 8 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x04000000-0x0400ffff]
PM: Registered nosave memory: [mem 0x09d00000-0x09ffffff]
PM: Registered nosave memory: [mem 0x5bb93000-0x5bcddfff]
PM: Registered nosave memory: [mem 0x5be0c000-0x5c1dafff]
PM: Registered nosave memory: [mem 0x5c1db000-0x5d009fff]
PM: Registered nosave memory: [mem 0x5f000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfe9fffff]
PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u262144
pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
Built 1 zonelists, mobility grouping on. Total pages: 1535290
Policy zone: Normal
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 5991656K/6238732K available (12300K kernel code, 2478K rwdata, 4244K rodata, 2404K init, 2416K bss, 247076K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
ftrace: allocating 39343 entries in 154 pages
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS: 524544, nr_irqs: 1096, preallocated irqs: 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
ACPI: Core revision 20180105
ACPI BIOS Error (bug): Failure creating [\_SB.SMIC], AE_ALREADY_EXISTS (20180105/dswload-380)
ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180105/psobject-252)
ACPI Error: AE_ALREADY_EXISTS, (SSDT: AMD PT) while loading table (20180105/tbxfload-228)
ACPI Error: 1 table load failures, 6 successful (20180105/tbxfload-246)
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: Fast TSC calibration failed
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 3593.263 MHz processor
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33cb774f9cc, max_idle_ns: 440795249908 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 7186.52 BogoMIPS (lpj=14373052)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 23 MCE banks
LVT offset 1 assigned for vector 0xf9
LVT offset 2 assigned for vector 0xf4
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
Spectre V2 : Mitigation: Full AMD retpoline
Freeing SMP alternatives memory: 36K
smpboot: CPU0: AMD Ryzen 5 2400G with Radeon Vega Graphics (family: 0x17, model: 0x11, stepping: 0x0)
Performance Events: Fam17h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Max logical packages: 2
smpboot: Total of 8 processors activated (57492.20 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x04000000-0x0400ffff] (65536 bytes)
PM: Registering ACPI NVS region [mem 0x5be0c000-0x5c1dafff] (3993600 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 16:33:04, date: 03/20/18
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1521563583.064:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI BIOS Error (bug): Failure looking up [\PTOS], AE_NOT_FOUND (20180105/psargs-364)
No Local Variables are initialized for Method ["\" ]
No Arguments are initialized for method ["\" ]
ACPI Error: Method parse/execution failed \, AE_NOT_FOUND (20180105/psparse-550)
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 2 GPEs in block 00 to 1F
ACPI: Power Resource [P0ST] (on)
ACPI: Power Resource [P3ST] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:15d0] type 00 class 0x060000
pci 0000:00:00.2: [1022:15d1] type 00 class 0x080600
pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
pci 0000:00:01.1: [1022:15d3] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.2: [1022:15d3] type 01 class 0x060400
pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
pci 0000:00:08.1: [1022:15db] type 01 class 0x060400
pci 0000:00:08.1: enabling Extended Tags
pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.2: [1022:15dc] type 01 class 0x060400
pci 0000:00:08.2: enabling Extended Tags
pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:18.0: [1022:15e8] type 00 class 0x060000
pci 0000:00:18.1: [1022:15e9] type 00 class 0x060000
pci 0000:00:18.2: [1022:15ea] type 00 class 0x060000
pci 0000:00:18.3: [1022:15eb] type 00 class 0x060000
pci 0000:00:18.4: [1022:15ec] type 00 class 0x060000
pci 0000:00:18.5: [1022:15ed] type 00 class 0x060000
pci 0000:00:18.6: [1022:15ee] type 00 class 0x060000
pci 0000:00:18.7: [1022:15ef] type 00 class 0x060000
pci 0000:00:01.1: PCI bridge to [bus 01]
pci 0000:02:00.0: [1022:43b9] type 00 class 0x0c0330
pci 0000:02:00.0: reg 0x10: [mem 0xfe8a0000-0xfe8a7fff 64bit]
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:02:00.1: [1022:43b5] type 00 class 0x010601
pci 0000:02:00.1: reg 0x24: [mem 0xfe880000-0xfe89ffff]
pci 0000:02:00.1: reg 0x30: [mem 0xfe800000-0xfe87ffff pref]
pci 0000:02:00.1: PME# supported from D3hot D3cold
pci 0000:02:00.2: [1022:43b0] type 01 class 0x060400
pci 0000:02:00.2: PME# supported from D3hot D3cold
pci 0000:00:01.2: PCI bridge to [bus 02-08]
pci 0000:00:01.2: bridge window [io 0xf000-0xffff]
pci 0000:00:01.2: bridge window [mem 0xfe700000-0xfe8fffff]
pci 0000:00:01.2: bridge window [mem 0xf0300000-0xf03fffff 64bit pref]
pci 0000:03:00.0: [1022:43b4] type 01 class 0x060400
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:01.0: [1022:43b4] type 01 class 0x060400
pci 0000:03:01.0: PME# supported from D3hot D3cold
pci 0000:03:02.0: [1022:43b4] type 01 class 0x060400
pci 0000:03:02.0: PME# supported from D3hot D3cold
pci 0000:03:03.0: [1022:43b4] type 01 class 0x060400
pci 0000:03:03.0: PME# supported from D3hot D3cold
pci 0000:03:04.0: [1022:43b4] type 01 class 0x060400
pci 0000:03:04.0: PME# supported from D3hot D3cold
pci 0000:02:00.2: PCI bridge to [bus 03-08]
pci 0000:02:00.2: bridge window [io 0xf000-0xffff]
pci 0000:02:00.2: bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:02:00.2: bridge window [mem 0xf0300000-0xf03fffff 64bit pref]
pci 0000:03:00.0: PCI bridge to [bus 04]
pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [io 0xf000-0xf0ff]
pci 0000:05:00.0: reg 0x18: [mem 0xfe700000-0xfe700fff 64bit]
pci 0000:05:00.0: reg 0x20: [mem 0xf0300000-0xf0303fff 64bit pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:01.0: PCI bridge to [bus 05]
pci 0000:03:01.0: bridge window [io 0xf000-0xffff]
pci 0000:03:01.0: bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:03:01.0: bridge window [mem 0xf0300000-0xf03fffff 64bit pref]
pci 0000:03:02.0: PCI bridge to [bus 06]
pci 0000:03:03.0: PCI bridge to [bus 07]
pci 0000:03:04.0: PCI bridge to [bus 08]
pci 0000:09:00.0: [1002:15dd] type 00 class 0x030000
pci 0000:09:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:09:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:09:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:09:00.0: reg 0x24: [mem 0xfe600000-0xfe67ffff]
pci 0000:09:00.0: enabling Extended Tags
pci 0000:09:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:09:00.1: [1002:15de] type 00 class 0x040300
pci 0000:09:00.1: reg 0x10: [mem 0xfe688000-0xfe68bfff]
pci 0000:09:00.1: enabling Extended Tags
pci 0000:09:00.1: PME# supported from D1 D2 D3hot D3cold
pci 0000:09:00.2: [1022:15df] type 00 class 0x108000
pci 0000:09:00.2: reg 0x18: [mem 0xfe500000-0xfe5fffff]
pci 0000:09:00.2: reg 0x24: [mem 0xfe68c000-0xfe68dfff]
pci 0000:09:00.2: enabling Extended Tags
pci 0000:09:00.3: [1022:15e0] type 00 class 0x0c0330
pci 0000:09:00.3: reg 0x10: [mem 0xfe400000-0xfe4fffff 64bit]
pci 0000:09:00.3: enabling Extended Tags
pci 0000:09:00.3: PME# supported from D0 D3hot D3cold
pci 0000:09:00.4: [1022:15e1] type 00 class 0x0c0330
pci 0000:09:00.4: reg 0x10: [mem 0xfe300000-0xfe3fffff 64bit]
pci 0000:09:00.4: enabling Extended Tags
pci 0000:09:00.4: PME# supported from D0 D3hot D3cold
pci 0000:09:00.6: [1022:15e3] type 00 class 0x040300
pci 0000:09:00.6: reg 0x10: [mem 0xfe680000-0xfe687fff]
pci 0000:09:00.6: enabling Extended Tags
pci 0000:09:00.6: PME# supported from D0 D3hot D3cold
pci 0000:00:08.1: PCI bridge to [bus 09]
pci 0000:00:08.1: bridge window [io 0xe000-0xefff]
pci 0000:00:08.1: bridge window [mem 0xfe300000-0xfe6fffff]
pci 0000:00:08.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:0a:00.0: [1022:7901] type 00 class 0x010601
pci 0000:0a:00.0: reg 0x24: [mem 0xfe900000-0xfe9007ff]
pci 0000:0a:00.0: enabling Extended Tags
pci 0000:0a:00.0: PME# supported from D3hot D3cold
pci 0000:00:08.2: PCI bridge to [bus 0a]
pci 0000:00:08.2: bridge window [mem 0xfe900000-0xfe9fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
pci 0000:09:00.0: vgaarb: setting as boot VGA device
pci 0000:09:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:09:00.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
e820: reserve RAM buffer [mem 0x09d00000-0x0bffffff]
e820: reserve RAM buffer [mem 0x5bb93000-0x5bffffff]
e820: reserve RAM buffer [mem 0x5be0c000-0x5bffffff]
e820: reserve RAM buffer [mem 0x5f000000-0x5fffffff]
e820: reserve RAM buffer [mem 0x21f340000-0x21fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xfeb80000-0xfebfffff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x0a00-0x0a2f] has been reserved
system 00:03: [io 0x0a30-0x0a3f] has been reserved
system 00:03: [io 0x0a40-0x0a4f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: [io 0x040b] has been reserved
system 00:05: [io 0x04d6] has been reserved
system 00:05: [io 0x0c00-0x0c01] has been reserved
system 00:05: [io 0x0c14] has been reserved
system 00:05: [io 0x0c50-0x0c51] has been reserved
system 00:05: [io 0x0c52] has been reserved
system 00:05: [io 0x0c6c] has been reserved
system 00:05: [io 0x0c6f] has been reserved
system 00:05: [io 0x0cd0-0x0cd1] has been reserved
system 00:05: [io 0x0cd2-0x0cd3] has been reserved
system 00:05: [io 0x0cd4-0x0cd5] has been reserved
system 00:05: [io 0x0cd6-0x0cd7] has been reserved
system 00:05: [io 0x0cd8-0x0cdf] has been reserved
system 00:05: [io 0x0800-0x089f] has been reserved
system 00:05: [io 0x0b00-0x0b0f] has been reserved
system 00:05: [io 0x0b20-0x0b3f] has been reserved
system 00:05: [io 0x0900-0x090f] has been reserved
system 00:05: [io 0x0910-0x091f] has been reserved
system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:05: [mem 0xfec01000-0xfec01fff] could not be reserved
system 00:05: [mem 0xfedc0000-0xfedc0fff] has been reserved
system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:05: [mem 0xfed80000-0xfed8ffff] could not be reserved
system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 6 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.1: PCI bridge to [bus 01]
pci 0000:03:00.0: PCI bridge to [bus 04]
pci 0000:03:01.0: PCI bridge to [bus 05]
pci 0000:03:01.0: bridge window [io 0xf000-0xffff]
pci 0000:03:01.0: bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:03:01.0: bridge window [mem 0xf0300000-0xf03fffff 64bit pref]
pci 0000:03:02.0: PCI bridge to [bus 06]
pci 0000:03:03.0: PCI bridge to [bus 07]
pci 0000:03:04.0: PCI bridge to [bus 08]
pci 0000:02:00.2: PCI bridge to [bus 03-08]
pci 0000:02:00.2: bridge window [io 0xf000-0xffff]
pci 0000:02:00.2: bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:02:00.2: bridge window [mem 0xf0300000-0xf03fffff 64bit pref]
pci 0000:00:01.2: PCI bridge to [bus 02-08]
pci 0000:00:01.2: bridge window [io 0xf000-0xffff]
pci 0000:00:01.2: bridge window [mem 0xfe700000-0xfe8fffff]
pci 0000:00:01.2: bridge window [mem 0xf0300000-0xf03fffff 64bit pref]
pci 0000:00:08.1: PCI bridge to [bus 09]
pci 0000:00:08.1: bridge window [io 0xe000-0xefff]
pci 0000:00:08.1: bridge window [mem 0xfe300000-0xfe6fffff]
pci 0000:00:08.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:00:08.2: PCI bridge to [bus 0a]
pci 0000:00:08.2: bridge window [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
pci_bus 0000:02: resource 0 [io 0xf000-0xffff]
pci_bus 0000:02: resource 1 [mem 0xfe700000-0xfe8fffff]
pci_bus 0000:02: resource 2 [mem 0xf0300000-0xf03fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xf000-0xffff]
pci_bus 0000:03: resource 1 [mem 0xfe700000-0xfe7fffff]
pci_bus 0000:03: resource 2 [mem 0xf0300000-0xf03fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xf000-0xffff]
pci_bus 0000:05: resource 1 [mem 0xfe700000-0xfe7fffff]
pci_bus 0000:05: resource 2 [mem 0xf0300000-0xf03fffff 64bit pref]
pci_bus 0000:09: resource 0 [io 0xe000-0xefff]
pci_bus 0000:09: resource 1 [mem 0xfe300000-0xfe6fffff]
pci_bus 0000:09: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
pci_bus 0000:0a: resource 1 [mem 0xfe900000-0xfe9fffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:09:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 51600K
AMD-Vi: Unable to write to IOMMU perf counter.
pci 0000:00:00.2: can't derive routing for PCI INT A
pci 0000:00:00.2: PCI INT A: not connected
iommu: Adding device 0000:00:01.0 to group 0
iommu: Adding device 0000:00:01.1 to group 1
iommu: Adding device 0000:00:01.2 to group 2
iommu: Adding device 0000:00:08.0 to group 3
iommu: Adding device 0000:00:08.1 to group 3
iommu: Adding device 0000:00:08.2 to group 3
iommu: Adding device 0000:00:14.0 to group 4
iommu: Adding device 0000:00:14.3 to group 4
iommu: Adding device 0000:00:18.0 to group 5
iommu: Adding device 0000:00:18.1 to group 5
iommu: Adding device 0000:00:18.2 to group 5
iommu: Adding device 0000:00:18.3 to group 5
iommu: Adding device 0000:00:18.4 to group 5
iommu: Adding device 0000:00:18.5 to group 5
iommu: Adding device 0000:00:18.6 to group 5
iommu: Adding device 0000:00:18.7 to group 5
iommu: Adding device 0000:02:00.0 to group 6
iommu: Adding device 0000:02:00.1 to group 6
iommu: Adding device 0000:02:00.2 to group 6
iommu: Adding device 0000:03:00.0 to group 6
iommu: Adding device 0000:03:01.0 to group 6
iommu: Adding device 0000:03:02.0 to group 6
iommu: Adding device 0000:03:03.0 to group 6
iommu: Adding device 0000:03:04.0 to group 6
iommu: Adding device 0000:05:00.0 to group 6
iommu: Adding device 0000:09:00.0 to group 3
iommu: Adding device 0000:09:00.1 to group 3
iommu: Adding device 0000:09:00.2 to group 3
iommu: Adding device 0000:09:00.3 to group 3
iommu: Adding device 0000:09:00.4 to group 3
iommu: Adding device 0000:09:00.6 to group 3
iommu: Adding device 0000:0a:00.0 to group 3
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Extended features (0x4f77ef22294ada):
PPR NX GT IA GA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
AMD-Vi: virtual APIC enabled
AMD-Vi: Lazy IO/TLB flushing enabled
amd_uncore: AMD NB counters detected
amd_uncore: AMD LLC counters detected
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=21 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.1: AER enabled with IRQ 26
pcieport 0000:00:01.2: AER enabled with IRQ 27
pcieport 0000:00:01.1: Signaling PME with IRQ 26
pcieport 0000:00:01.2: Signaling PME with IRQ 27
pcieport 0000:00:08.1: Signaling PME with IRQ 28
pcieport 0000:00:08.2: Signaling PME with IRQ 29
vesafb: mode is 1920x1080x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0x00000000a874436b, using 8128k, total 8128k
Console: switching to colour frame buffer device 240x67
fb0: VESA VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:02:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x08000410
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.16.0-041600rc6-generic xhci-hcd
usb usb1: SerialNumber: 0000:02:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 14 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:02:00.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.16.0-041600rc6-generic xhci-hcd
usb usb2: SerialNumber: 0000:02:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
usb: port power management may be unreliable
xhci_hcd 0000:09:00.3: xHCI Host Controller
xhci_hcd 0000:09:00.3: new USB bus registered, assigned bus number 3
xhci_hcd 0000:09:00.3: hcc params 0x0270ffe5 hci version 0x110 quirks 0x00000410
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.16.0-041600rc6-generic xhci-hcd
usb usb3: SerialNumber: 0000:09:00.3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:09:00.3: xHCI Host Controller
xhci_hcd 0000:09:00.3: new USB bus registered, assigned bus number 4
xhci_hcd 0000:09:00.3: Host supports USB 3.1 Enhanced SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.16.0-041600rc6-generic xhci-hcd
usb usb4: SerialNumber: 0000:09:00.3
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
xhci_hcd 0000:09:00.4: xHCI Host Controller
xhci_hcd 0000:09:00.4: new USB bus registered, assigned bus number 5
xhci_hcd 0000:09:00.4: hcc params 0x0260ffe5 hci version 0x110 quirks 0x00000410
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 4.16.0-041600rc6-generic xhci-hcd
usb usb5: SerialNumber: 0000:09:00.4
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:09:00.4: xHCI Host Controller
xhci_hcd 0000:09:00.4: new USB bus registered, assigned bus number 6
xhci_hcd 0000:09:00.4: Host supports USB 3.1 Enhanced SuperSpeed
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 4.16.0-041600rc6-generic xhci-hcd
usb usb6: SerialNumber: 0000:09:00.4
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: CPU0: patch_level=0x08101004
microcode: CPU1: patch_level=0x08101004
microcode: CPU2: patch_level=0x08101004
microcode: CPU3: patch_level=0x08101004
microcode: CPU4: patch_level=0x08101004
microcode: CPU5: patch_level=0x08101004
microcode: CPU6: patch_level=0x08101004
microcode: CPU7: patch_level=0x08101004
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (1021595837, 0)->(1108007201, -86411364)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: f0fef630e15885a23458e1c9138020797709ec3e'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
Magic number: 10:211:591
rtc_cmos 00:02: setting system clock to 2018-03-20 16:33:05 UTC (1521563585)
acpi_cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 2404K
Write protecting the kernel read-only data: 20480k
Freeing unused kernel memory: 2008K
Freeing unused kernel memory: 1900K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
ahci 0000:02:00.1: version 3.0
ahci 0000:02:00.1: SSS flag set, parallel bus scan disabled
ahci 0000:02:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:02:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
r8169 0000:05:00.0 eth0: RTL8168g/8111g at 0x000000001cfacfda, e0:d5:5e:67:cb:12, XID 0c000800 IRQ 60
r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
scsi host7: ahci
ata1: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880100 irq 59
ata2: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880180 irq 59
ata3: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880200 irq 59
ata4: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880280 irq 59
ata5: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880300 irq 59
ata6: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880380 irq 59
ata7: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880400 irq 59
ata8: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880480 irq 59
[drm] amdgpu kernel modesetting enabled.
ahci 0000:0a:00.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:0a:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part sxs
ahci 0000:0a:00.0: both AHCI_HFLAG_MULTI_MSI flag set and custom irq handler implemented
AMD IOMMUv2 driver by Joerg Roedel
scsi host8: ahci
scsi host9: ahci
ata9: SATA max UDMA/133 abar m2048@0xfe900000 port 0xfe900100 irq 62
ata10: SATA max UDMA/133 abar m2048@0xfe900000 port 0xfe900180 irq 63
Parsing CRAT table with 1 nodes
Ignoring ACPI CRAT on non-APU system
Virtual CRAT table created for CPU
Parsing CRAT table with 1 nodes
Creating topology SYSFS entries
Topology: Add CPU node
Finished initializing topology
kfd kfd: Initialized module
checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
fb: switching to amdgpudrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (RAVEN 0x1002:0x15DD 0x1002:0x15DD 0xC6).
[drm] register mmio base: 0xFE600000
[drm] register mmio size: 524288
[drm] probing gen 2 caps for device 1022:15db = 700d03/e
[drm] probing mlw for device 1022:15db = 700d03
[drm] VCN decode is enabled in VM mode
[drm] VCN encode is enabled in VM mode
r8169 0000:05:00.0 enp5s0: renamed from eth0
[drm] BIOS signature incorrect 0 0
ATOM BIOS: 113-RAVEN-102
[drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
amdgpu 0000:09:00.0: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used)
amdgpu 0000:09:00.0: GTT: 1024M 0x000000F500000000 - 0x000000F53FFFFFFF
[drm] Detected VRAM RAM=2048M, BAR=256M
[drm] RAM width 128bits UNKNOWN
[TTM] Zone kernel: Available graphics memory: 3057778 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 2048M of VRAM memory ready
[drm] amdgpu: 3072M of GTT memory ready.
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled (table at 0x000000F400800000).
[drm] use_doorbell being set to: [true]
[drm] Found VCN firmware Version: 1.73 Family ID: 18
usb 1-2: new high-speed USB device number 2 using xhci_hcd
[drm:construct [amdgpu]] *ERROR* construct: Invalid Connector ObjectID from Adapter Service for connector index:2! type 0 expected 3
[drm:construct [amdgpu]] *ERROR* construct: Invalid Connector ObjectID from Adapter Service for connector index:3! type 0 expected 3
[drm] Display Core initialized with v3.1.27!
[drm] SADs count is: -2, don't need to read it
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] VCN decode and encode initialized successfully.
[drm] fb mappable at 0xE1000000
[drm] vram apper at 0xE0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: amdgpudrmfb (fb0) is primary device
amdgpu: [powerplay] smu firmware version too old, can not set dpm level
amdgpu: [powerplay] smu firmware version too old, can not set dpm level
ata1: SATA link down (SStatus 0 SControl 300)
Console: switching to colour frame buffer device 240x67
ata9: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
amdgpu 0000:09:00.0: fb0: amdgpudrmfb frame buffer device
amdgpu 0000:09:00.0: ring 0(gfx) uses VM inv eng 4 on hub 0
amdgpu 0000:09:00.0: ring 1(comp_1.0.0) uses VM inv eng 5 on hub 0
amdgpu 0000:09:00.0: ring 2(comp_1.1.0) uses VM inv eng 6 on hub 0
amdgpu 0000:09:00.0: ring 3(comp_1.2.0) uses VM inv eng 7 on hub 0
amdgpu 0000:09:00.0: ring 4(comp_1.3.0) uses VM inv eng 8 on hub 0
amdgpu 0000:09:00.0: ring 5(comp_1.0.1) uses VM inv eng 9 on hub 0
amdgpu 0000:09:00.0: ring 6(comp_1.1.1) uses VM inv eng 10 on hub 0
amdgpu 0000:09:00.0: ring 7(comp_1.2.1) uses VM inv eng 11 on hub 0
amdgpu 0000:09:00.0: ring 8(comp_1.3.1) uses VM inv eng 12 on hub 0
amdgpu 0000:09:00.0: ring 9(kiq_2.1.0) uses VM inv eng 13 on hub 0
amdgpu 0000:09:00.0: ring 10(sdma0) uses VM inv eng 4 on hub 1
amdgpu 0000:09:00.0: ring 11(vcn_dec) uses VM inv eng 5 on hub 1
amdgpu 0000:09:00.0: ring 12(vcn_enc0) uses VM inv eng 6 on hub 1
amdgpu 0000:09:00.0: ring 13(vcn_enc1) uses VM inv eng 7 on hub 1
amdgpu: [powerplay] smu firmware version too old, can not set dpm level
[drm] Initialized amdgpu 3.23.0 20150101 for 0000:09:00.0 on minor 0
usb 1-2: New USB device found, idVendor=1a40, idProduct=0101
usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-2: Product: USB 2.0 Hub [MTT]
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
usb 1-9: new high-speed USB device number 3 using xhci_hcd
tsc: Refined TSC clocksource calibration: 3593.246 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33cb66efe9d, max_idle_ns: 440795351205 ns
clocksource: Switched to clocksource tsc
usb 1-2.2: new full-speed USB device number 4 using xhci_hcd
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: OCZ-VERTEX2, 1.33, max UDMA/133
ata2.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
usb 1-9: New USB device found, idVendor=048d, idProduct=1336
usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-9: Product: Mass Storage Device
usb 1-9: Manufacturer: Generic
usb 1-9: SerialNumber: 00000000000006
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA OCZ-VERTEX2 1.33 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.9 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 > sda3
sd 1:0:0:0: [sda] Attached SCSI disk
usb 1-10: new high-speed USB device number 5 using xhci_hcd
ata3: SATA link down (SStatus 0 SControl 300)
usb 1-10: New USB device found, idVendor=05e3, idProduct=0610
usb 1-10: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-10: Product: USB2.0 Hub
hub 1-10:1.0: USB hub found
hub 1-10:1.0: 4 ports detected
usb-storage 1-9:1.0: USB Mass Storage device detected
scsi host10: usb-storage 1-9:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
usb 1-2.2: New USB device found, idVendor=08bb, idProduct=2900
usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.2: Product: USB Audio CODEC
usb 1-2.2: Manufacturer: Burr-Brown from TI
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Burr-Brown from TI USB Audio CODEC as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2.2/1-2.2:1.3/0003:08BB:2900.0001/input/input2
hid-generic 0003:08BB:2900.0001: input,hidraw0: USB HID v1.00 Device [Burr-Brown from TI USB Audio CODEC ] on usb-0000:02:00.0-2.2/input3
usb 1-2.3: new low-speed USB device number 6 using xhci_hcd
ata4: SATA link down (SStatus 0 SControl 300)
usb 1-2.3: New USB device found, idVendor=093a, idProduct=2510
usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.3: Product: USB Optical Mouse
usb 1-2.3: Manufacturer: PixArt
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2.3/1-2.3:1.0/0003:093A:2510.0002/input/input3
hid-generic 0003:093A:2510.0002: input,hidraw1: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:02:00.0-2.3/input0
usb 1-10.2: new full-speed USB device number 7 using xhci_hcd
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5.00: ATA-8: TOSHIBA DT01ACA200, MX4OABB0, max UDMA/133
ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA TOSHIBA DT01ACA2 ABB0 PQ: 0 ANSI: 5
sd 4:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 4:0:0:0: [sdb] 4096-byte physical blocks
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 4:0:0:0: [sdb] Attached SCSI disk
usb 1-10.2: New USB device found, idVendor=04e8, idProduct=3268
usb 1-10.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-10.2: Product: Samsung ML-1610 Series
usb 1-10.2: Manufacturer: Samsung Electronics Co., Ltd.
usb 1-10.2: SerialNumber: 3B66BRJYB06019..
usb 1-2.4: new low-speed USB device number 8 using xhci_hcd
ata6: SATA link down (SStatus 0 SControl 300)
usb 1-2.4: New USB device found, idVendor=04b3, idProduct=3025
usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.4: Product: USB NetVista Full Width Keyboard.
usb 1-2.4: Manufacturer: LITE-ON Technology
input: LITE-ON Technology USB NetVista Full Width Keyboard. as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2.4/1-2.4:1.0/0003:04B3:3025.0003/input/input4
scsi 10:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 10:0:0:0: Attached scsi generic sg2 type 0
sd 10:0:0:0: [sdc] Attached SCSI removable disk
hid-generic 0003:04B3:3025.0003: input,hidraw2: USB HID v1.10 Keyboard [LITE-ON Technology USB NetVista Full Width Keyboard.] on usb-0000:02:00.0-2.4/input0
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Reached target Swap.
systemd[1]: Listening on Network Service Netlink Socket.
systemd[1]: Listening on Journal Socket.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
systemd-journald[423]: Received request to flush runtime journal from PID 1
random: crng init done
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
cryptd: max_cpu_qlen set to 1000
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
usblp 1-10.2:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3268
usbcore: registered new interface driver usblp
snd_hda_intel 0000:09:00.1: Handle vga_switcheroo audio client
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
SVM: Virtual VMLOAD VMSAVE supported
SVM: Virtual GIF supported
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:09:00.1/sound/card0/input5
input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.1/0000:09:00.1/sound/card0/input6
input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:08.1/0000:09:00.1/sound/card0/input7
input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:08.1/0000:09:00.1/sound/card0/input8
input: HD-Audio Generic HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:08.1/0000:09:00.1/sound/card0/input9
input: HD-Audio Generic HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:08.1/0000:09:00.1/sound/card0/input10
MCE: In-kernel MCE decoding enabled.
snd_hda_codec_realtek hdaudioC2D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC2D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC2D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC2D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC2D0: dig-out=0x11/0x0
snd_hda_codec_realtek hdaudioC2D0: inputs:
snd_hda_codec_realtek hdaudioC2D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC2D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC2D0: Line=0x1a
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:09:00.6/sound/card2/input11
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:09:00.6/sound/card2/input12
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:09:00.6/sound/card2/input13
input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:09:00.6/sound/card2/input14
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:09:00.6/sound/card2/input15
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
usbcore: registered new interface driver snd-usb-audio
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1400 audit(1521563595.035:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=1026 comm="apparmor_parser"
audit: type=1400 audit(1521563595.119:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=1030 comm="apparmor_parser"
audit: type=1400 audit(1521563595.119:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc//sanitized_helper" pid=1030 comm="apparmor_parser"
audit: type=1400 audit(1521563595.127:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/ioquake3/ioq3ded" pid=1023 comm="apparmor_parser"
audit: type=1400 audit(1521563595.151:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=1034 comm="apparmor_parser"
audit: type=1400 audit(1521563595.175:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=1024 comm="apparmor_parser"
audit: type=1400 audit(1521563595.175:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=1024 comm="apparmor_parser"
audit: type=1400 audit(1521563595.195:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1028 comm="apparmor_parser"
audit: type=1400 audit(1521563595.195:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1028 comm="apparmor_parser"
audit: type=1400 audit(1521563595.195:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1028 comm="apparmor_parser"
amdgpu: [powerplay] pp_dpm_get_temperature was not implemented.
amdgpu: [powerplay] pp_dpm_get_temperature was not implemented.
IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
r8169 0000:05:00.0 enp5s0: link down
r8169 0000:05:00.0 enp5s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
r8169 0000:05:00.0 enp5s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready
amdgpu: [powerplay] smu firmware version too old, can not set dpm level
rfkill: input handler disabled
amdgpu: [powerplay] pp_dpm_get_temperature was not implemented.
amdgpu: [powerplay] pp_dpm_get_temperature was not implemented.
amdgpu: [powerplay] pp_dpm_get_temperature was not implemented.
amdgpu: [powerplay] pp_dpm_get_temperature was not implemented.
amdgpu: [powerplay] pp_dpm_get_temperature was not implemented.
amdgpu: [powerplay] pp_dpm_get_temperature was not implemented.
amdgpu: [powerplay] pp_dpm_get_temperature was not implemented.
amdgpu: [powerplay] pp_dpm_get_temperature was not implemented.
amdgpu: [powerplay] pp_dpm_get_temperature was not implemented.
amdgpu: [powerplay] pp_dpm_get_temperature was not implemented.
amdgpu: [powerplay] pp_dpm_get_temperature was not implemented.
amdgpu: [powerplay] pp_dpm_get_temperature was not implemented.
amdgpu: [powerplay] pp_dpm_get_temperature was not implemented.
amdgpu: [powerplay] pp_dpm_get_temperature was not implemented.
amdgpu: [powerplay] pp_dpm_get_temperature was not implemented.
amdgpu: [powerplay] pp_dpm_get_temperature was not implemented.
amdgpu: [powerplay] pp_dpm_get_temperature was not implemented.
amdgpu: [powerplay] pp_dpm_get_temperature was not implemented.
amdgpu: [powerplay] pp_dpm_get_temperature was not implemented.
amdgpu: [powerplay] pp_dpm_get_temperature was not implemented.
amdgpu: [powerplay] pp_dpm_get_sclk_od was not implemented.
amdgpu: [powerplay] pp_dpm_get_temperature was not implemented.
amdgpu: [powerplay] pp_dpm_get_temperature was not implemented.